How to operate the cross-country forklift safer when loading and unloading?

1. Goods loaded by cross-country forklifts should not be too high to avoid blocking the driver's vision and causing accidents; except for short-interval shifts, two plates of goods are not allowed to be transported together.

2. When the cross-country forklift lifts the goods, the fork should be raised first and then lowered first and then skewed.

3. When using a cross-country forklift to lift off, you must stand firmly on a pallet with a bottom plate before you can work. It is forbidden to stand on the fork.

4. Do not transport loose goods to avoid tipping over, and fix them firmly before shipping; use pallets to raise the goods, objects that are not easy to be stable, such as high-height equipment, empty barrels, easy-to-slide cylinders or objects must be tied Put on the rope and tie it tightly to raise it.

5. It is forbidden to use forks to directly transport dangerous goods such as flammable, explosive and toxic.

6. When parking, do not hang the fork in the air. Prevent the driver from leaving the cross-country forklift when the fork is hanging in the air.

7. No matter whether there is loading or not, no one can stay under the fork.

8. The unloaded goods must be stacked in an unobstructed address in an orderly manner, and neither the goods nor the cross-country forklift shall be parked at the entrance of the passage.